New Products
 

With more request regarding smaller and compact products, we have come up with not one but two new products, DIY Smart Series & DIY Eco Series.

DIY (Do It Yourself Series) allows you to be involved in the process of assembling, mounting and setting up your own aquarium. Best of all you can even do this project with your friends and family.

DIY Smart Series
 

How to assemble
 

 

1. Open the box and place the aquarium on a sturdy and flat table/cabinet.

2. Cut off the tape to remove the cover (be careful not to scratch the surface).
 

3. Remove the LED light by unplugging the socket on the top (right side) and put it aside.
 

4. Take out all the things provided in the aquarium.

How to do setup
 

 

1) Add sand to the aquarium. We recommend natural white sand in size medium.

2) Be sure to fully cover the bottom part of the aquarium with sand (ideally 1inch from

the bottom).

3) Add tap water to the aquarium until it reaches the lower part of the frame.

4) Clean the inner part of the aquarium with a soft sponge and run your fingers

through the sand.

5) Pour in the Bio Enzyme provided.

6) Switch on the power.

7) Allow up to 1 hour for the water to turn clear.

8) Let the Bio Enzyme sit for 5-7 days before adding the fishes.

Scan for video guide

Smart series playlist.png

DIY Eco Series
 

Things provided in the package

  • 1 x LED Light 

  • 2 x Bracket 

  • 6 xWall Plugs 

  • 1 x Magnet Cleaner

  • 1 x Fish Food

  • 1 x Seazone Bio Enzyme 

  • 1 x Fish Net

How to assemble
 

1. Open the box and place the aquarium on a sturdy and flat table/cabinet

2. Cut off the tape to remove the cover (be careful not to scratch the surface).

3. Remove the LED light by unplugging the socket on the top (right side) and put it aside.

4. Take out all the things provided in the aquarium.

How to mount
 

1. Get the center point of the aquarium.

2. Measure the distance between the center of the aquarium to the white bars on the left  and right sides of the center point. This is where the bracket

will be placed.

3. On the wall that you're going to install, mark the center point and the space for the bracket (ideally eye level)

4.Place the bracket on one side and mark the points to drill. be sure that the bracket is straight. Proceed to drill the holes.

5. Insert the wall plug into the bracket and screw it tight.

6. Place the bracket in the hole and use a hammer to nail it into the wall and tighten it using a screwdriver.

 

7. Before marking the next bracket, use the light cover to adjust and check the level of the bracket. Mark the points and drill the holes.

8.Repeat steps 5&6 on the other side.

9. Place the aquarium into the bracket.

10. Place the U-clip to secure the aquarium to the bracket to prevent it from moving.

Scan for video guide

Eco Series Playlist.png

How To

Do setup
 

 

1) Add sand to the aquarium. We recommend natural white sand in size medium.

2) Be sure to fully cover the bottom part of the aquarium with sand (ideally 1inch from

the bottom).

3) Add tap water to the aquarium until it reaches the lower part of the frame.

4) Clean the inner part of the aquarium with a soft sponge and run your fingers

through the sand.

5) Pour in the Bio Enzyme provided.

6) Switch on the power.

7) Allow up to 1 hour for the water to turn clear.

8) Let the Bio Enzyme sit for 5-7 days before adding the fishes.

Do Maintenance
 

1) Gently clean the inner surface of the aquarium when there is any algae build-up.

2) Run your finger through the sand to release the algae to the water (filter will absorb the algae and by-products.

3) Take out the pump and wash the filter by running it under tap water and place it back in.

Reminder

 

1) Do not overfeed the fishes. Only once a day (1 pinch).

2) Switch off the power when you are washing the filter.

3) Place the aquarium on a strong table or counter top before filling up the water.

4) Be very careful not to scratch the inner surface of the aquarium while doing the setup or decor.